Henan Wanda Industrial Intelligent Equipment Co., Ltd

NEWS

——

Company News

Industry News

Steps for checking the operating status of nano sander

Time

2023-12-25

Source

Author

To check the running status of the nano sand mill, the following steps can be taken:

1, Observe the appearance of the mill: check the appearance of the mill for any obvious damage or foreign objects, such as oil leaks, loose parts, cracks, etc. Ensure the overall integrity of the mill exterior.

2, Check the electrical system: check whether the connection of the electrical system is firm and whether the wires are intact. Ensure that the electrical system operates normally and that the switches and control panel function properly.

3, Check the cooling system: check whether the water flow of the cooling system is smooth and whether the cooling water temperature is normal. Ensure that the cooling system can effectively maintain the temperature of the nano-sander in the appropriate range.

4, Check the sanding media: check the quality and condition of the sanding media, make sure that there is no obvious wear or pollution of the sanding media.

5, Check the feeding and discharging system: check whether the pipelines of the feeding system and discharging system are smooth, whether the valves are opened and closed normally, to ensure the smooth flow of materials.

6、Check the guards: Check whether the guards of the mill are complete and reliable, such as emergency stop button, protective cover, etc..

In addition to the above steps, you can also carry out the corresponding inspection and maintenance work according to the instruction manual and maintenance manual of the specific nano sand mill. If any abnormality or problem is found, it should be repaired in time or contact professional technicians to deal with it.

Recent News

■

The crushing principle of nano sand mill

—

2023-06-12