Henan Wanda Industrial Intelligent Equipment Co., Ltd

NEWS

——

Company News

Industry News

Influence of feed rate on the operating efficiency of nano-sand mills

Time

2023-12-11

Source

Author

The impact of the feeding speed on the operating efficiency of the nano sand mill is mainly in the following aspects:

1, Grinding efficiency: feeding speed is too fast will lead to the grinding media to fully grind the material, thus affecting the grinding efficiency. Because the grinding sand on the material grinding role mainly depends on the grinding process of grinding sand and materials between the friction and shear force, feeding speed is too fast to make the friction and shear force to shorten the action time, resulting in a reduction in grinding efficiency.

2, Equipment load: feeding speed is too fast will lead to increased equipment load. Because the feed rate is too fast means that the unit time into the equipment of the material increased, and the processing capacity of the equipment is limited, beyond the processing capacity of the material will be piled up in the equipment, increasing the load of the equipment, may lead to equipment overload and shutdown.

3, Abrasive sand wear: feeding speed is too fast will also accelerate the abrasion of abrasive sand. Because the feed rate is too fast so that the friction between the grinding sand and the material and shear force increases, resulting in increased abrasion of the grinding sand, shortening the service life of the grinding sand.

4, Equipment maintenance: the feed rate is too fast to increase the difficulty and frequency of maintenance of the nano-sand mill. Because the feed rate is too fast to make the equipment load increase, resulting in accelerated wear and tear of equipment components, the need for frequent maintenance and replacement of parts, increasing the maintenance cost of the equipment.

5, Energy consumption: feeding speed is too fast will lead to increased energy consumption of the equipment. Because the feed rate is too fast to make the equipment running time is extended, at the same time in order to meet the demand for processing capacity, the equipment may require higher power operation, resulting in increased energy consumption.

To sum up, too fast feeding speed will adversely affect the operating efficiency of the nano-sand mill, so the feeding speed should be adjusted according to the processing capacity of the equipment and the nature of the material in actual operation to ensure the normal operation of the equipment and grinding efficiency.

Recent News

■

The crushing principle of nano sand mill

—

2023-06-12