Henan Wanda Industrial Intelligent Equipment Co., Ltd

NEWS

——

Company News

Industry News

How to balance the temperature of stainless steel reactor

Time

2023-10-20

Source

Author

Stainless steel reactor needs to maintain the temperature balance, because only after the temperature balance, we can make the chemical reaction more smoothly, to maintain the temperature balance, then we can use certain methods to solve the problem, here we specifically say to maintain the temperature balance of the methods are?

First, to manipulate the reaction rate of the stainless steel reactor, the opening disk is not too fast, when the equipment is used people usually rush, mechanical rotation to the value, in fact, this method is often counterproductive. In this case, the equipment is very easy to reverse, RTD will cause deformation of the mixing kettle. In addition to this, remove the deformation, which also causes the body temperature to rise rapidly, destroying the mechanical properties.

Second, you also need to control the refrigeration temperature of the stainless steel reaction kettle, gradual cycle, if it rises to the rated temperature, it will form an impact on the material reaction. In this type of situation, the actual effect of refrigeration system refrigeration is very important, but pay attention to the cycle gradually, to prevent the formation of too large a temperature difference.

Third, in order to balance the temperature, but also need to be its material processing volume should be within a reasonable range, so the more the number of material processing, stainless steel reactor temperature is also higher. This is to remind the equipment operator may temperature, due to too much material, did not reach the ideal temperature in the specified time, but this is normal.

So that for the stainless steel reactor temperature balance aspects we can be strictly according to certain methods to operate, maintain temperature balance, can reduce the temperature difference caused by the reaction is not clean, for such equipment, taking into account the chemical reaction problems, I hope that we operate in strict accordance with the requirements.

Recent News

■

The crushing principle of nano sand mill

—

2023-06-12