Henan Wanda Industrial Intelligent Equipment Co., Ltd

NEWS

——

Company News

Industry News

Stainless steel reactor design requirements and heat utilization

Time

2023-10-11

Source

Author

Stainless steel reactor is widely used, with high temperature resistance, corrosion resistance, fast heating speed, etc. In order to help you understand more about stainless steel reactor, the following introduces its design requirements and heat utilization.

First, the design requirements of stainless steel reactor

Stainless steel reaction kettle in the process of operation will be effective through its electric heating thermostatic control cabinet on the temperature controller, so that it can be effective to a certain extent to control the temperature of its heat conduction oil and its equipment within the reaction temperature of the material, so that it can be effective to a certain extent to achieve its fully automated control, electric heating device is installed in groups, mainly through the electric heating thermostatic control cabinet to realize its group control. Electric heating device is installed in groups, mainly through the electric heating thermostat control cabinet to realize its group control.

Stainless steel reactor in the process of design is very compact and simple, in the process of operation is simple, to a certain extent, the effective realization of its heating and refrigeration reaction, and then in the type of stirring, so that and the equipment in the production of higher efficiency and better yield, less cost.

Second, the use of heat energy of stainless steel reactor

Stainless steel reaction kettle in the process of operation need to make reasonable use of its thermal energy, in the process of using the process of selecting its ideal process operating conditions, so that to a certain extent can effectively strengthen its thermal insulation measures, to a certain extent to improve its heat transfer efficiency, which will make the heat loss is reduced to a low limit, so that the residual heat or reaction after the generation of the full utilization of the heat energy.

Equipment in the use of the process is very convenient, the equipment is mainly used in its electric heating rod heating jacket inside the thermal oil, which will make the heat conduction temperature rise to its required temperature, and then the temperature measurement and control instrument for the control of the electric heating rod to make it power off constant temperature.

Recent News

■

The crushing principle of nano sand mill

—

2023-06-12