Henan Wanda Industrial Intelligent Equipment Co., Ltd

NEWS

——

Company News

Industry News

How to check the running condition of sand mill?

Time

2023-09-13

Source

Author

To check the running status of the sand mill, you can take the following steps:

1、Observe the appearance of the mill: check the appearance of the mill for obvious damage or foreign objects, such as oil leaks, loose parts, cracks. Ensure the overall integrity of the mill exterior.

2、Check the electrical system: check whether the connection of the electrical system is firm and whether the wires are intact. Ensure that the electrical system operates normally and the switches and control panel function properly.

3、Check the cooling system: check whether the water flow of the cooling system is smooth and whether the temperature of the cooling water is normal. Ensure that the cooling system can effectively keep the temperature of the nanosander within the appropriate range.

4、Check the sanding media: check the quality and condition of the sanding media to ensure that there is no obvious wear and tear or pollution of the sanding media.

5、Check the feeding and discharging system: check whether the pipeline of the feeding system and discharging system is smooth, and whether the valve is opened and closed normally to ensure the smooth flow of materials.

6、Check the protective device: check whether the protective device of the mill is complete and reliable, such as emergency stop button, protective cover and so on.

In addition to the above steps, you can also according to the specific nanosand mill instruction manual and maintenance manual, the corresponding inspection and maintenance work.

Recent News

■

The crushing principle of nano sand mill

—

2023-06-12