Henan Wanda Industrial Intelligent Equipment Co., Ltd

NEWS

——

Company News

Industry News

Stainless steel reaction kettle preparation before use

Time

2023-09-08

Source

Author

Stainless steel reactor using high temperature as well as high pressure chemical reaction device, good sealing is the key to the work of the reactor, so we have to do a good job of preparation and inspection before use, the following will give you an introduction to the use of the reactor before the sealing inspection and preparation:

First, before use:

1, to check whether its various valves are smooth, especially the pressure gauge as well as the mouth of the explosion-proof membrane, for the air intake conduit.

2, in the use of also need to pay special attention to whether there is no clogging phenomenon, if there is material contamination or clogging, should be the conduit or air intake pipe from the kettle cover dismantling.

Second, after cleaning:

1, the inner surface is mirror polished to ensure no health dead ends, the whole equipment adopts the fully enclosed design, so as to ensure that the material is always in a sterile state, the outer surface can be selected from sandblasted, sandblasted, cold rolled original color matte finish.

2, the kettle body after drying in its sealing check, very good kettle body into its heating furnace, the protruding part needs to be aligned with the groove into the kettle, and then gently rotate the kettle body, put the stable, slow and smooth kettle body and cover closed.

Third, before feeding the need to check whether the equipment is contaminated, the inner wall of the equipment, cooling coils, stirring, temperature probe casing and jointing surfaces with ethanol for cleaning, and then use its distilled water rinse, rinse with cotton or silk cloth dipped in ethanol to wipe clean.

Recent News

■

The crushing principle of nano sand mill

—

2023-06-12