Henan Wanda Industrial Intelligent Equipment Co., Ltd

NEWS

——

Company News

Industry News

Conditions for grinding in horizontal sand mills

Time

2023-08-29

Source

Author

The key to the grinding movement of the horizontal sand mill is to achieve the cutting movement of the abrasive, so its motion will directly affect the processing accuracy and production efficiency of the nano sand mill. Therefore, the reasonable choice of motion mode and orbit is an important step.

Horizontal sander grinding conditions:

1. The grinding movement of the horizontal sand mill should ensure uniform contact between the accessories and the appearance of all materials. This can make the appearance of the nano sand mill evenly loaded and worn, so as to adhere to the appearance accuracy of the horizontal sand mill itself for a long time.

2, The grinding movement should ensure the uniform grinding of the parts, that is, every point of the surface of the grinding parts is equal. This requires the parallel movement of the grinding movement, which can make the workpiece surface connected to any two points, and remain parallel throughout the grinding movement, which is very important to ensure the shape accuracy and scale uniformity of the workpiece.

3. The grinding movement should make the movement track change direction regularly, avoiding premature repetition. This can make the surface of the workpiece many cutting stripes regularly intertwined and offset, that is, the more the research more flat, and thus achieve the purpose of improving the appearance of the workpiece precision.

4, The grinding movement should be based on different grinding process requirements to choose a better movement speed. For example, in the grinding of finer workpieces, you need to choose low-speed grinding, while in the grinding of smaller scale or lower precision workpieces, you need to choose medium or high speed.

5, The whole horizontal sand mill grinding and movement recommendations should be kept stable from beginning to end. Especially for grinding area is small, slender workpiece, pay more attention to slow down the change of the direction of movement, avoid small bends, so that the direction of movement as far as possible star. Favor the long direction well of the workpiece should slow down the movement speed. Otherwise, the movement will be unstable resulting in uneven grinding surface, or fall out of the corner to solve the quality defects.

6, In the grinding movement, nano sander and workpiece problems should be in the elastic floating state, rather than forced limit state. This can better contact the appearance of the workpiece and nano-sander, accurate nano-sander appearance of several shapes to the workpiece, and then not be overly affected by the precision of the grinding machine.